TEL: +86-510-88333510
Categories
Contact Us
Add: Langxia, Yangjian Town, Xishan District, Wuxi City, Jiangsu, P.R.C
Tel: +86-510-88333510
Fax: +86-510-88330388
Mob: +8615852758637
E-mail: benc31@126.com
Knowledge
Home > Knowledge > Content
Street motorcycle reliability and safety guard assembly requirements
Dec 07, 2018

For the user, the reliability of street motorcycles is extremely important, which is not only related to the performance of the vehicle itself, but also related to our daily travel safety. After the end of the reliability test of the vehicle, first, the structural parts such as the frame of the test vehicle are required to be free from deformation, cracking and the like.

 

In addition, in the process of viewing street motorcycles, several conditions should be ensured, including the wheels of its shaft transmission, the rigidity and strength of the wheel forks and axles are in line with the requirements for the vibration running performance test and design service life of the vehicle; The performance technical indicators should not fall by more than 5% as specified in the technical conditions.

 

In addition to paying attention to the reliability of street motorcycles, there are also strict requirements for the safety guards deployed therein. First of all, the steering lock anti-theft device should be installed firmly and reliably, and can be effectively locked. Secondly, the rear view mirror installation should be firm and reliable, and can effectively maintain its position. When a pedestrian or the like touches the rear view mirror, it should have the function of mitigating the impact.

 

In addition, the seat cushion of the electric motorcycle should be installed reliably and not loose. In addition, some basic configurations of the vehicle should also be kept in normal operation. For example, lamps, signals, instruments and electrical equipment and their switches should be installed firmly and in good condition. They must not be loose, damaged or invalid due to vehicle vibration during driving. All switches must not be switched on and off due to vehicle vibration. All electrical conductors in the vehicle should be bundled, arranged neatly, fixedly clamped, and the connectors should be connected reliably and without looseness.


  • Contact Us
    Add: Langxia, Yangjian Town, Xishan District, Wuxi City, Jiangsu, P.R.C
    Tel: +86-510-88333510
    Fax: +86-510-88330388
    Mob: +8615852758637
    E-mail: benc31@126.com
  • Categories
  • Copyright © Jiangsu Sinski Vehicle Science & Technology Co.,Ltd All Rights Reserved.