TEL: +86-510-88333510
Categories
Contact Us
Add: Langxia, Yangjian Town, Xishan District, Wuxi City, Jiangsu, P.R.C
Tel: +86-510-88333510
Fax: +86-510-88330388
Mob: +8615852758637
E-mail: benc31@126.com
Knowledge
Home > Knowledge > Content
Circuit system inspection of lightweight electric bicycles
Nov 06, 2018

For the protection of the use of lightweight electric bicycles, the user should try not to use zero start (ie, starting in place) during the starting process, especially on the load and uphill. When starting, you should first ride with human resources, then turn to electric driving when a certain speed is reached, or use electric power to drive directly.

 

This is because when the lightweight electric bicycle is just starting, the motor needs to overcome the large static friction force. At this time, the current demand is large, and the resistance current is approached or even reached, so that the battery can work at a high current, which will affect the use of the battery. life. When conducting circuit inspection, turn on the power switch, check whether the circuit is unblocked, whether the connector is plugged firmly and reliably, and whether the fuse is working properly, especially if the connection between the battery output terminal and the cable is firm and reliable. The fault should be discovered in time.

 

It is recommended that before the lightweight electric bicycle rides, it should be noted that the main fasteners are good. If the fasteners are loose or loose, they should be tightened or replaced in time.http://www.sinskivehicle.com/

 


  • Contact Us
    Add: Langxia, Yangjian Town, Xishan District, Wuxi City, Jiangsu, P.R.C
    Tel: +86-510-88333510
    Fax: +86-510-88330388
    Mob: +8615852758637
    E-mail: benc31@126.com
  • Categories
  • Copyright © Jiangsu Sinski Vehicle Science & Technology Co.,Ltd All Rights Reserved.